| 周强,丁强,翟建建,杨雨欣.基于节能率预测的注塑机节能模型研究及实测验证[J].电力需求侧管理,2017,19(1):35-37, 40 |
| 基于节能率预测的注塑机节能模型研究及实测验证 |
| Research and validation of the injection molding machine and energy saving model based on the energy saving rate forecasting |
| 投稿时间：2016-12-01 |
| DOI：10.3969/j.issn.1009-1831.2017.01.009 |
| 中文关键词: 注塑机 伺服电动机 电磁加热 节能 |
| 英文关键词: injection molding machine servo motors electromagnetic heating energy saving |
| 基金项目:国家电网公司科学技术项目(典型高耗能用户能效电厂关键技术及运营模式研究) |
|
| 摘要点击次数: 1527 |
| 全文下载次数: 1341 |
| 中文摘要: |
| 过对注塑机工作原理及能耗构成进行分析，研究其关键节能技术，对比建立注塑机电动机油泵系统及加热系统节能改造能耗模型，进而得出基于模型的节能率预测方法，并通过实例验证其可行性，为注塑机节能改造的节能率预测提供理论依据，为改造效果经济性评估提供算法支撑。 |
| 英文摘要: |
| The article analyzed the working principle of the injection molding machine and energy consumption, and researched the key energy saving technologies.By contrasting, energy saving transformation models for oil pump system of injection molding machine motors and heating system energy consumption were built up, and then it drew the energy saving rate prediction method based on the models.The feasibility is verified through examples, which provides the theory basis for the energy saving reform of the injection molding machine and energy saving rate prediction, provides algorithm supports for modification effect economic evaluation. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |