| 王 婷,刘 潇,武 媚,包宇庆,张春雪,许 琦,赵 晶.大规模空调负荷聚合建模及跟踪控制方案研究[J].电力需求侧管理,2020,22(6):51-56 |
| 大规模空调负荷聚合建模及跟踪控制方案研究 |
| Research on load aggregation modeling and tracking control scheme for large scale air conditioning |
| 投稿时间：2020-08-03 修订日期：2020-08-27 |
| DOI：10. 3969 / j. issn. 1009-1831. 2020. 06. 011 |
| 中文关键词: 大规模空调 聚合建模 自适应爬坡 需求响应 参考信号 |
| 英文关键词: large scale air conditioner aggregation modeling adaptive hill climbing demand response reference signal |
| 基金项目:国网冀北电力有限公司科技项目（52018K18001C） |
|
| 摘要点击次数: 1913 |
| 全文下载次数: 679 |
| 中文摘要: |
| 需求响应技术可以削峰填谷，提高能源利用效率，提升电力系统稳定性。直接负荷控制通过直接控制用电负荷使得需求侧负荷变成可调用资源，是实施基于激励的需求响应的一种有效方法，实现相对容易。空调用电量大，储热、储冷能力较好，将空调在高峰时段的用电量转移到低谷时段，对用户的影响小。因此，空调能够影响总负荷曲线的峰谷差异，是重要的需求响应资源。基于此，建立了空调的热力学模型，提出了基于蒙特卡洛方法建立大规模空调负荷聚合模型，并研究了实施直接负荷控制的空调负荷跟踪控制方案，讨论了空调负荷参与需求响应的负荷削减潜力。根据负荷调峰的需求计算控制空调温度或开、关状态的参考信号，然后采用自适应爬坡控制方法，跟踪参考信号的实施情况。仿真结果表明，通过跟踪参考信号来实施空调负荷的直接负荷控制可以依据需求有效削减负荷。 |
| 英文摘要: |
| Demand response (DR) technologies can cut peaks and fill valleys, improve energy efficiency and power system stability. Direct load control (DLC) makes the demand-side load available by directly controlling the power load. It is an effective method of implementing excitation-based DR by directly controlling the power load, which is relatively easy to implement. Air conditioning has good heat storage or cold storage capacity, and its electricity consumption is an important part of total household energy consumption, which can be transferred power demand to off -peak hours. Therefore, air conditioning can affect the peak-to-valley difference of the total load curve and is an important demand response resource. The thermodynamic model of air conditioning is established. The model of large-scale air conditioning load aggregation based on Monte Carlo method is proposed. The air conditioning load tracking control scheme of DLC is studied. The load reduction potential of air conditioning load participating in DR is discussed. The reference signal for controlling the air conditioner temperature or the open or close state is calculated according to the load peaking demand, and then the adaptive hill climbing (AHC) control method is used to track the implementation of the reference signal. The simulation results show that the DLC that tracks the reference signal to implement the air conditioning load can effectively reduce the load as needed. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |